 |
 |
|
|
|
 |
|
|
|
|
|
 |
Parixit
Industries Limited
706, Silver Oaks,
Near Mahalakshmi Cross Roads,
Paldi , Ahmedabad.
Ph No : 079 - 66318121(10
Lines) Fax No : 079 - 66318125
E-Mail :
ho@parixit.com |
|
|
|
|
|
Disc Filters
|
|
 |
We are the only ISI certified disc
filter manufactures in India. Our
disc filters are equipped with
online back flush arrangements.
|
 |
|
|
|
Disc Filters |
|
|
|
|
|
Apple 2" Disc Filter With easily
detachable Spine
Parixit industries Limited is the
first to introduce a fully polymer
disc filter with ISI mark in India.
Line/Angle Filter
Salient Features :
- Non-corrosive hence Safe for Acidic Cleaning.
- Easily Detachable spine.
- Sturdy.
- High volume filter with increased flow Capacity.
- Adapts to horizontal or vertical installation.
- Pressure testing ports are at the filters.
- Smooth and Easy Maintenance.
Procedure for Dismantling
(the detachable spine is loose in the cover)
- Make sure that there is no water pressure inside the filter.
- Drain the filter through the drainage valve.
- Open the filter cover and remove it from the filter body.
- If the filter rings require acid treatment, dip the complete filter element in acid.
Assembling
- Position the filter element into the filter cover.
- Tighten the filter cover on the body and close.
- Make sure the Gap shown as 'G' should not be more than 3mm.
|
|
|
|
|
|
TECHNICAL DATA |
|
|
|
Inlet / Outlet Diameter |
2" Male Thread |
| Max Pressure
|
10 bar |
| Max. Flow rate 400-100 micron |
<25 m3/h (6.9. 1/sec) |
| Total Filtration Area |
1000 cm2 |
| Total Filtration Volume |
1280 cm3 |
| Filter Length |
C. 512 mm |
| Filter Width |
D. 235 mm |
| Distance Between
Connections |
A. 117.5 mm B. 75.0 mm |
| Weight |
3.15 kg. |
| Maximum Temperature |
70
ºC |
| pH |
2-13 |
|
|
|
|
Apple Filteration System
PART LIST
|
Sr.No. |
Inlet / Outlet
Diameter |
Materials |
| 1 |
1/2" Tap |
PP/PVC |
| 2 |
Cover |
PP |
| 3 |
Spine |
PP |
| 4 |
Disc Sets |
PP |
| 5 |
Stop Ring Element |
PP |
| 6 |
O-Ring Element |
EPDM |
| 7 |
Threaded Body |
PP |
| 8 |
Gauge Port Seal |
EPDM |
| 9 |
Gauge Port Nut |
PP |
| 10 |
2" Cap |
PP |
| 11 |
Cover with tap (Top
Section) |
PP |
| 12 |
Single Filter Element |
PP |
| 13 |
Threaded ends body
(Bottom Section) |
PP |
Disc Filter Parts List
|
|
|
|
Top
|
|
)
)
)