 |
 |
|
|
|
 |
|
|
|
|
 |
Parixit
Industries Limited
706, Silver Oaks,
Near Mahalakshmi Cross Roads,
Paldi , Ahmedabad.
Ph No : 079 - 66318121(10
Lines) Fax No : 079 - 66318125
E-Mail :
ho@parixit.com |
|
|
|
|
|
Sprinkler Irrigation System |
|
 |
Our farmers have to depend on the
monsoon season to irrigate their
agricultural land, which due to its
own characteristics sometimes leads
to drought or floods. Underground
water sources being in limited
quantity, it is not possible to
irrigate our cultivable land by
traditional flood irrigation system
as more than 50% of total water is
lost due to seepage, evaporation
hampering our efforts to get best
results.
|
|
|
 |
|
|
Sprinkler Irrigation System |
| |
|
|
|
 |
Now it is time to follow the modern irrigation techniques where precious drops
of water are utilized in irrigation of agricultural land. These techniques
provide controlled irrigation to our cultivated land in the most economical way
of water management.
Parixit Industries Limited ensures the application of specific amount of water
to crops at a pre-determined rate which is the most suited and best calculated
by the research done by agronomists in different conditions. This is done by the
use of rotating sprinklers placed on best quality ISI marked "Parixit" Brand
HDPE pipes which are light in weight, portable and are provided with quick
action couplers for easy & quick handling. "Parixit:" Sprinklers System
increases the efficiency of farmers on job and saves water up to 50%.
The system is designed considering the crops grown, availability of water and
its composition, type of soil, elevation, temperature, humidity and wind
velocity to get the best result. "Parixit" Sprinklers Irrigation System
irrigates a much larger area as compared to the traditional flood irrigation
system.
"Parixit" Sprinkler irrigation System can effectively be used on almost all the
crops grown in country like wheat, gram, soyabean, vegetables, cotton,
sugarcane, flowers, groundnut, mustard, etc.
"Parixit" Sprinkler Irrigation System is backed by a dealer network and "Parixit"
team of service engineers to provide after sales services.
Salient features of Parixit
Sprinkler System:
- All couplers and fittings are made of High Density Polyethylene from
suitable HDPE grannuals to match the pipes.
- Each coupler and fitting are fitted with one or more rubber
washers which make an effective leak proof joint.
- With highest quality stainless steel springs and extrudes brass
nozzles for long life. The nozzles are specially tapered & slit for uniform long radius spray.
- All items are designed to work at predetermined operating pressure.
- The pipes are strong, stress resistant and last long as they are not affected by climatic conditions.
- The pipes have lower friction losses so the same pump can cover the length.
|
|
|
|
|
|
|
DATA SHEET for Sprinkler Irrigation System:
|
|
| A. |
Raw Material Test Results |
Acceptance Norms |
Reference |
| |
Designation (MRS) |
6.3, 8.0 & 10 Mpa at 20ºC |
IS 4984 : 1995 |
| |
Melt Flow Rate (I5) |
0.41 to 1.10 Gm/10 min.
at 190º
C |
IS 2530 : 1963 |
| |
Density |
940.5 to 946.4 Kg/cm3 |
IS 7328 : 1992 |
| B |
Dimensions & Tolerances: |
|
|
| |
Nominal Outside Diameter |
63 mm + 0.6 mm
75 mm + 0.7 mm
90 mm + 0.8 mm
110 mm + 1.0 mm |
IS 14151 (pt-1): 1999 |
| |
Wall Thickness |
63 mm
75 mm
90 mm
110 mm |
Class I
2.0 –2.4mm
2.2 –2.6mm
2.7 –3.2mm
|
Class 2
2.0 –2.4mm
2.5 –2.9mm
2.9 –3.4mm
3.4 –3.9mm
|
IS 14151 (pt-1): 1999 |
| |
Ovality |
63 mm
75 mm
90 mm
110 mm |
1.5 mm
1.6 mm
1.8 mm
2.2 mm |
IS 14151 (pt-1): 1999 |
| |
Length |
3.0 or 6.0m or as agreed between manufacturer
and Purchaser. |
IS 14151 (pt-1): 1999 |
| |
Visual Appearance (Surface Finish)
|
Satisfactory |
IS 14151 (pt-1): 1999 |
| C. |
Performance Requirement |
|
|
| |
Heat Reversion
Test |
Max 3% |
IS 14151 (pt-1): 1999 |
| |
Hydrostatic Pressure Resistance Test |
QUALITY TEST
Duration: 165 hrs. at 80ºC
Stress Values : 3.5 Mpa
ACCEPTANCE TEST
Duration : 48 hrs at 80º
C
Stress Values: 3.8 Mpa
|
IS 14151 (pt-1): 1999 |
| |
Fusion Compatibility Test |
QUALITY TEST
Duration: 165 hrs at 80º C
Stress Values : 3.5 Mpa
ACCEPTANCE TEST
Duration : 48 hrs 80º C Stress Values : 3.8 Mpa
|
IS 14151 (pt-1): 1999 |
| |
Density |
940.5 to 946.4 (both inclusive) Kg/cm3 |
IS 7328 : 1992 |
| |
Melt Flow Rate (I5) |
0.41 to 1.10 (both inclusive) Gm/10 min. |
IS 2530 : 1963 |
| |
Carbon Black Content & Dispersion |
2.5 ± 0.5% |
IS 2530 : 1963 |
| |
Tensile Test |
19 Mpa 600% |
IS 14151 (pt-1): 1999 |
| |
Workmanship and Appearance |
Satisfactory |
IS 14151 (pt-2): 1999 |
| |
Bearing Capacity of Holding Attachment |
The holding attachment is strong enough to
withstand the pressure two times the working pressure of pipe. |
IS 14151 (pt-2): 1999 |
| |
Leakage Test |
without leakage |
IS 14151 (pt-2): 1999 |
| |
Hydraulic Proof Test |
The assembly shall not show ant sign of
localized swelling, leakage, weeping or deformation and shall not burst
during the test. |
IS 14151 (pt-2): 1999 |
| |
Weldability Test |
QUALITY TEST
Duration: 165 hrs. at 80ºC Stress Values : 3.5Mpa
ACCEPTANCE TEST
Duration : 48 hrs at 80ºC Stress Values: 3.8 Mpa
|
IS 14151 (pt-2): 1999 |
|
4. |
Identification & Marking |
Color: Black All pipes shall be indelibly marked by ink/paint or hot foil
embossing
Batch No.
Digit 1 & 2 : Year of Manufacture
Digit 3 & 4 : Month of mfg.
Digit 5 & 6 : Series number.
|
IS 14151: 1999 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Top |
|
)
)